A fireplace mantel starts near $100 for a basic floating beam and can run several thousand dollars for custom wood or cast stone. Natural stone can go past $10,000. Installation adds to the total. These are approximate US ranges from recent years, and prices vary by region and by material.
Mantel prices by type
| Mantel type | Approximate material cost |
|---|---|
| Floating beam, new pine or poplar | $100 to $400 |
| Hardwood beam (oak, walnut, maple) | $250 to $900 |
| Reclaimed barn wood beam | $200 to $1,200 or more |
| MDF or paint-grade surround kit | $300 to $1,500 |
| Cast stone mantel | $1,000 to $5,000 |
| Custom wood mantel and surround | $1,500 to $5,000 or more |
| Natural stone or marble mantel | $1,500 to $10,000 or more |
| Antique or salvage mantel | $300 to $5,000 or more |
Sizes, woods and finishes change these figures a lot, so use the table to compare categories rather than to predict one exact price.
Floating beams and shelves
A floating beam or shelf is the lowest-cost option. New pine or poplar beams are typically the cheapest. Hardwood beams cost more, and the price rises with size. A beam can be installed with a hidden steel bracket, which typically costs about $40 to $200 on its own.
For how to hang one, see how to install a floating fireplace mantel.
Hardwood, custom and surround mantels
A surround covers the sides and top of the opening, not just the shelf. MDF or paint-grade surround kits are the budget choice. Custom wood mantels and surrounds cost more and are built to your room’s measurements.
Stone, cast stone and marble
Stone mantels are the heaviest and most expensive option. Cast stone usually costs less than natural stone, but both are much more than wood. Heavy stone can weigh several hundred pounds and may need wall reinforcement, and installation usually needs masons rather than a carpenter.
Heavy stone must be anchored properly. A mantel that tips or detaches is a crush hazard.
Reclaimed and antique mantels
Reclaimed barn wood and antique or salvage mantels are priced very widely, from a few hundred dollars to more than $5,000. Hand-hewn and long beams cost more. Reclaimed wood is not automatically cheaper than new, so compare prices. Check any reclaimed piece for nails, insects and moisture before you install it.
Brackets and hardware
Brackets and hardware are a separate cost. A hidden steel bracket typically costs about $40 to $200. Remember to include it when you compare a beam’s price with a surround’s price.
Installation costs
- Beam or shelf installation: about $200 to $800.
- Full surround installation: about $500 to $2,000 or more.
- Carpenter rates: roughly $50 to $100 per hour. Stone installs cost more.
If you install a beam yourself, you avoid the labor line, but you still need the right anchors and a clearance check. For masonry walls, see attaching a mantel to a brick fireplace.
Extras: finishing, removal and repairs
Some jobs add costs beyond the mantel itself:
- Finishing or painting: about $100 to $500.
- Removing an old mantel: about $100 to $500.
- Drywall or brick repair: varies with the damage.
Prefab fireplaces restrict what you can install. The manufacturer’s manual sets the clearances, which can limit the material you choose.
Ways to lower the cost
- Choose a new pine or poplar beam for a painted or stained look.
- Use a bracket and a beam rather than a full surround.
- Install the beam yourself if you are comfortable with the clearance check and the anchors.
- Compare reclaimed wood only after you have checked it for hazards.
Safety: heavy stone needs proper anchoring
Stone and cast stone mantels can weigh hundreds of pounds. Anchor them into studs or solid masonry, following the manufacturer’s instructions. A mantel that detaches can cause serious injury. Use two people to lift and seat heavy beams.
For a whole-project budget, see what a fireplace remodel costs. For style options by material, see fireplace mantel remodel.