Fireplace Parts and Mantels

What is the average cost to remodel a fireplace?

There is no single average. A typical fireplace remodel runs about $2,000 to $7,000, cosmetic jobs can cost under $1,500, and full rebuilds can top $10,000.

On this page
  1. The short answer: typical ranges
  2. Costs by project type
  3. Inserts and gas logs
  4. Chimney relining and other hidden costs
  5. Permits and inspections
  6. Why labor is a large share of a reface
  7. How to get comparable quotes
  8. Ways to keep costs down
  9. Safety notes

There is no single average. A typical fireplace remodel runs about $2,000 to $7,000. Cosmetic jobs can cost under $1,500, and full rebuilds can top $10,000. Prices vary by region, by material, and by the condition of the existing fireplace, so treat these as approximate US ranges from recent years.

The short answer: typical ranges

Project Approximate cost
Simple cosmetic update Under $1,500
Typical remodel About $2,000 to $7,000
Full rebuild Over $10,000

The middle range covers most projects that combine a new surface, a new mantel and minor repairs. The biggest variable is what you find once the old finish is removed.

Costs by project type

  • Paint or limewash brick: about $100 to $300 for a DIY job, or $500 to $1,500 with a professional.
  • Tile reface: about $1,000 to $3,500 installed, depending on the tile.
  • Stone or thin brick veneer: about $1,500 to $6,000 or more.
  • New mantel: about $200 to $1,000 for a basic beam or kit, and $1,500 to $5,000 or more for custom wood or stone.
  • Glass doors: about $300 to $1,500.

For mantel-specific prices, see how much a fireplace mantel costs.

Inserts and gas logs

Replacing the fireplace with an insert costs more than a surface change:

  • Wood-burning insert: about $3,000 to $6,000 installed, including a stainless steel liner.
  • Gas insert: about $3,000 to $5,500 installed. A new gas line adds cost.
  • Electric insert: about $300 to $2,000, with little installation work.
  • Gas logs in a masonry fireplace: about $500 to $2,500, if a gas line already exists.

Converting a masonry fireplace to gas can be inexpensive only where a gas line is already in place. Without one, the cost can rise quickly.

Chimney relining and other hidden costs

A remodel can reveal problems that add to the total:

  • Chimney relining: a stainless steel liner typically costs about $2,500 to $7,000, depending on the chimney’s height.
  • Firebox repair: damaged firebrick or mortar joints add labor and materials.
  • Gas line work: needs a licensed professional and often a permit.

Ask the contractor to flag these costs before you sign. A cosmetic reface does not fix a damaged liner, so a low quote can be followed by a larger bill if the liner turns out to be damaged.

Permits and inspections

  • Permits: typically $50 to $500 when gas, structural or appliance work is involved.
  • Inspection: a Level 2 inspection, as described in NFPA 211, is often needed when a home is sold or an appliance is changed. It typically costs about $100 to $500.

Local requirements vary. Check with your building department before you start.

Why labor is a large share of a reface

Labor is often 30 to 50 percent of a reface project. A tile or veneer job takes more time than the material suggests, and prep work such as removing old finishes adds to the bill. Materials that look inexpensive can still cost a lot to install.

How to get comparable quotes

Get written quotes that list materials, labor, permits and any inspection or repair work. Quotes that leave out the liner, the permit or the gas line will not be comparable. Ask each contractor what is included and what is not.

Ways to keep costs down

  • Start with paint or limewash if the brick is in good condition.
  • Replace only the mantel rather than the full surround.
  • Do the paint or prep yourself and hire a professional for gas or structural work.
  • Confirm the inspection first so you do not pay for a surface change that will not last.

Safety notes

Before any remodel, have the firebox, flue liner and chimney inspected. A cracked liner or damaged firebrick can let heat reach the framing, and a surface reface can hide that damage. Gas line work should be done by a licensed professional.

For the style options that affect cost, see the fireplace mantel remodel guide. If you plan to attach a mantel to brick, see attaching a mantel to a brick fireplace.

The complete guide to fireplace parts and mantels

Parts of a Fireplace: Hearth, Firebox, Mantel and More
Read the guide

Keep exploring

Guides from other topics

All topics →