A fireplace is a set of parts that work together. The firebox holds the fire, the hearth protects the floor, the damper and flue carry smoke out, and the mantel and surround frame the whole thing. The names overlap in everyday talk, so this guide defines each part and shows how they fit.
The main parts at a glance
- Inside the firebox: firebox, inner hearth, grate, and ash dump
- Opening and throat: lintel, throat, damper, smoke shelf, and smoke chamber
- Chimney: flue, flue liner, chimney crown, cap, and flashing
- Outside the opening: hearth extension, surround, mantel, and overmantel
Parts differ by fireplace type. A masonry wood-burning fireplace has all of these. A factory-built or gas unit has many of them in a different form, so its manufacturer’s manual is the final guide.
The firebox and inner hearth
The firebox is the chamber where the fire burns. It is lined with firebrick, which is laid in refractory mortar rather than ordinary mortar. Standard firebrick is 9 by 4.5 by 2.5 inches. Under the International Residential Code (IRC), a masonry firebox is generally at least 20 inches deep. Rumford-style designs can be shallower, down to 12 inches.
The inner hearth is the floor of the firebox. Under the same code, it is masonry at least 4 inches thick and sits directly under the fire.
The hearth and the hearth extension
The hearth extension is the non-combustible area in front of the opening. It catches sparks, embers and ash before they reach the floor. Under the IRC, it is at least 2 inches thick, and its size depends on the opening:
- Openings under 6 square feet: at least 16 inches in front and 8 inches on each side.
- Openings of 6 square feet or more: at least 20 inches in front and 12 inches on each side.
Local codes and amendments can differ, so check them before you build or remodel.
Hearth vs fireplace: what is the difference?
The hearth is the fire-resistant floor: the inner hearth inside the firebox plus the extension out into the room. The fireplace is the whole system, including the firebox, damper, chimney, mantel and surround.
A common mistake is to call only the outer extension “the hearth” and forget the inner floor of the firebox. Both are part of the hearth.
Do all fireplaces need a hearth? A masonry wood-burning fireplace needs one under the code. For factory-built and gas units, the appliance listing and manual decide. Some gas units do not need a separate hearth, but you should follow the listing rather than guess.
What does a hearth look like? It is usually a flat, non-combustible surface of stone, brick, tile or concrete. It can sit flush with the floor or be raised, and it extends in front of the opening.
Are hearths outdated? Design trends have changed how hearths look, and many modern homes have none. For a wood-burning fire, the hearth’s safety job has not changed.
The opening, lintel and throat
The opening is the front face of the fireplace where you see the fire. Above it, a lintel (a steel angle or a masonry arch) spans the top and carries the weight of the masonry above. The throat is the narrow passage above the firebox that funnels smoke upward into the smoke chamber.
The damper and smoke shelf
The damper is a movable plate that opens to let smoke out and closes to keep cold air and downdrafts from coming in when no fire is burning. Two common types are the cast-iron throat damper and the top-sealing damper, which sits at the crown and usually seals better.
Behind the damper, the smoke shelf is a ledge that turns back downdrafts and catches falling debris. The smoke chamber is the tapered space between the throat and the flue.
The flue, flue liner and chimney
The flue is the passage that smoke and gases travel through. It is lined with clay tile, stainless steel or a cast-in-place liner. The flue is the passage inside the chimney, so the two words do not mean the same thing.
Flue size depends on the size of the opening and the height of the chimney. Have a qualified professional size the flue rather than working it out from a rule of thumb.
Outside, the chimney has several parts:
- Chimney crown: a sloped concrete cap on masonry chimneys that sheds water away from the flue.
- Chimney cap: a cover with spark-arrester mesh that keeps out rain and animals and keeps embers from escaping.
- Flashing: the metal that seals where the chimney meets the roof.
- Cricket: a small peaked structure on the roof, on the uphill side of a chimney wider than 30 inches, that directs water around the chimney.
For chimney height, see mantel code and clearance rules.
The surround, mantel and overmantel
These three are often mixed up:
- The surround is the decorative framing around the opening, including the side legs (also called jambs) and the header or frieze across the top.
- The mantel is the shelf and trim above the opening. It is part of the assembly, but it is not the same as the surround. Read the spelling and meaning of mantel for the full term.
- The overmantel is an optional structure above the shelf, such as tile, stone or a mirror, that extends toward the ceiling.
A surround usually covers the sides and top of the opening. A mantel can be a shelf alone. Keep that distinction in mind when you read about mantel clearances in the mantel code guide.
Doors, screens, grates and other accessories
Four common accessories are:
- Grate: a metal frame that holds logs off the floor so air can reach the fire from underneath.
- Andirons (fire dogs): supports for logs, often used with a grate.
- Screen: a mesh panel that keeps embers in the firebox.
- Glass doors: panels that change airflow and reduce heat loss when the fire is out.
Closing glass doors during a hot fire can restrict airflow and raise temperatures in the firebox and flue. Follow the manufacturer’s instructions for when to open them.
Factory-built and gas fireplaces
A factory-built (prefab) fireplace has a metal firebox with refractory panels. It is listed to UL 127, and its manual sets the clearances. Masonry code numbers do not apply to these units.
Gas fireplaces have their own parts:
- Pilot light: a small flame that lights the main burner.
- Thermocouple: two different metals joined at a junction. It senses the pilot’s heat and shuts off the gas if the pilot goes out.
- Thermopile: several thermocouples wired together, usually larger, about 3/8 inch in diameter.
Gas parts wear over time. If the pilot will not stay lit, a worn thermocouple is a common cause.
Common terms and mix-ups
- Flue vs chimney: the flue is the passage inside the chimney.
- Hearth vs hearth extension: the extension is only the part in front of the opening.
- Mantel vs surround: the mantel is the shelf and trim; the surround is the framing around the opening.
- Mantel vs mantle: the fireplace shelf is spelled “mantel.” See the spelling guide.
Inspection and safety
A cracked flue liner or firebrick can let heat reach the framing. Have the chimney and firebox inspected once a year, as NFPA 211 recommends. Code sections cited here come from the IRC, and local adoption varies, so your local inspector has the final say.
Before you change any part, read how to install a floating mantel or how to attach a mantel to brick. Both cover clearance checks you should do first.