Start here
Wood Burning Fireplace Tips: Using and Maintaining Your Fireplace
Practical tips for lighting, burning and maintaining a wood fireplace, from choosing dry firewood to ash handling and annual chimney inspections.
Wood Stoves and Wood Fires
Seasoned firewood, dampers, sweeping, creosote, chimney fires and carbon monoxide for wood burning fireplaces.
Start here
Practical tips for lighting, burning and maintaining a wood fireplace, from choosing dry firewood to ash handling and annual chimney inspections.
Yes, a wood fireplace can release carbon monoxide, a gas with no smell or color. Learn the causes, symptoms, alarm placement and what to do if one sounds.
Roaring noise, dense smoke or sparks from the chimney top can signal a chimney fire. Learn the warning signs, the first steps to take, and how to prevent one.
Creosote is condensed wood smoke that builds up in the flue and can ignite. Learn how it forms, the three stages, when to sweep and why removal needs a pro.
An open wood fireplace loses most of its heat up the chimney, while sealed stoves and inserts heat far more effectively. See how the efficiency numbers compare.
Yes. Every wood stove needs a flue and chimney to vent smoke and carbon monoxide outdoors. Here is what the flue, connector and chimney must meet.
Chimney height, clearance to combustibles, hearth size and firebox depth all follow code rules. Here is what to check and where to confirm locally.
Most firewood needs about 6 to 12 months to season, but moisture content matters more than time. Here is how to check wood and how to store it.
An open wood fireplace delivers only about 10 percent of its fuel's energy to the room, while sealed inserts and stoves do far better. Here are the numbers.
Regular fires usually need a sweep every year, while occasional users may go longer. Annual inspection still applies, and here is how to set your schedule.
Stop adding wood early, let the fire burn down, keep the damper open and wait for ashes to cool completely. Here is the safe order of steps.
Cool the fireplace fully, dry-brush loose soot, then clean brick, stone or glass with the gentlest method that works. Here is the safe order of steps.
Smoke in the room, hard-to-light fires, tar smells and flakes in the firebox all point to a dirty chimney. Here is how to check and what to do next.
The 3 to 10 rule is the 3-2-10 chimney height rule: at least 3 feet above the roof, and 2 feet above any roof within 10 feet. Here is how to measure it.
Trash, treated or painted wood, plywood, cardboard and wrapping paper release toxic smoke or cause hazards. Here is what to keep out of the firebox.
Keep the fireplace damper fully open while a fire burns, and close it only when the fire and embers are completely out. Here is how to tell when it is safe.
Related topics