Wood Fireplace Use and Safety

How long should firewood sit before burning?

Most firewood needs about 6 to 12 months to season, but moisture content matters more than time. Here is how to check wood and how to store it.

On this page
  1. Short answer
  2. Why time alone is not enough
  3. Typical seasoning times by wood type
  4. How to check whether firewood is ready
  5. How to season firewood well
  6. Why burning wet wood is a problem
  7. Storing firewood safely

Short answer

Most firewood needs roughly 6 to 12 months to season, and dense hardwoods such as oak often need 1 to 2 years. Time is only a rough guide, though. The better test is moisture content. Wood is ready to burn when it measures below 20 percent, the level the US EPA’s Burn Wise program recommends.

Why time alone is not enough

How fast wood dries depends on the species, how it is split and stacked, the climate, and how much sun and wind reach the pile. Two piles cut on the same day can be ready at very different times. Wood can also stay damp longer than expected if it is covered by a full tarp or stored in a closed shed.

Some sellers call wood “seasoned” without measuring it. Treat that label as a starting point and check the wood yourself.

Typical seasoning times by wood type

These are general ranges. Your own wood may dry faster or slower.

  • Softwoods such as pine, spruce and fir: about 6 to 12 months.
  • Ash, maple and birch: about 9 to 12 months.
  • Oak and other dense hardwoods: 1 to 2 years, and sometimes longer.

Splitting the wood soon after cutting speeds drying a great deal. Whole rounds dry much more slowly, because moisture leaves mainly through the end grain and the split faces.

How to check whether firewood is ready

  • Use a moisture meter. Push the pins into a freshly split face, along the grain. Surface readings on an unsplit log can understate the moisture inside.
  • Look at the ends. Dry wood often shows cracks, called checks, in the end grain.
  • Pick up two pieces and knock them together. Dry wood makes a hollow “clack.” Wet wood sounds dull.
  • Feel the weight. Seasoned pieces feel lighter than green wood of the same size.

Kiln-dried firewood is often ready to burn when you buy it, and it usually measures 20 percent or less. Check the seller’s claim rather than trusting the label.

How to season firewood well

  • Split the wood, and stack it off the ground on pallets or rails.
  • Stack in single rows with gaps between them for airflow.
  • Cover only the top of the stack, and leave the sides open. A tarp over the whole pile traps moisture.
  • Choose a sunny, windy spot. Those conditions dry wood fastest.

Why burning wet wood is a problem

Wet wood gives less heat, because much of the fire’s energy goes into boiling off the water. It also makes heavy smoke and encourages creosote to build up in the chimney. Creosote is a fire hazard. To learn how it forms, see creosote in your chimney.

Storing firewood safely

Keep firewood away from the house. Pests can move into a woodpile, and a large pile against the building adds fire risk. Some wildfire guidance calls for woodpiles 20 to 30 feet or more from structures, so check your local recommendations.

For materials that should never go in the firebox, see what not to burn in a fireplace. For general burning habits, see wood burning fireplace tips.

The complete guide to wood fireplace use and safety

Wood Burning Fireplace Tips: Using and Maintaining Your Fireplace
Read the guide

Keep exploring

Guides from other topics

All topics →