Wood Fireplace Use and Safety

How to Put Out a Fireplace Fire Safely

Stop adding wood early, let the fire burn down, keep the damper open and wait for ashes to cool completely. Here is the safe order of steps.

On this page
  1. Short answer
  2. Step-by-step
  3. What not to do
  4. Make sure it is fully out
  5. Ash disposal
  6. If the fire gets out of control

Short answer

Stop adding wood one to two hours before you need the fire out. Let it burn down, spread the embers, and keep the damper open until everything is cold. Do not douse the fire with water. Never leave a fire unattended, or go to sleep while it is still burning.

Step-by-step

  1. Stop adding fuel early. Stop feeding the fire one to two hours before you want it out, and let it burn down on its own.
  2. Close the screen or glass doors as the fire dies down. This keeps sparks and embers in the firebox.
  3. Spread the logs and embers. Use a poker to separate the logs and spread the coals, so they cool faster.
  4. Smother the embers. Cover them with ash, dry sand or baking soda. Baking soda also works as a dry chemical on small flames.
  5. Keep the damper open until all embers are out and cold. Closing it early can push smoke and carbon monoxide into the room. See when to close the fireplace damper.
  6. Check that the fire is out. There should be no glowing embers, no smoke, and no noticeable heat when you hold a hand above the ash.
  7. Move the ash to a metal can. Use a can with a tight-fitting lid, set on a noncombustible surface.

What not to do

  • Do not douse it with water. Water can crack firebrick or a stove through thermal shock. It also sends up steam and ash, and it makes a mess.
  • Do not close the damper to “put it out.” A closed damper does not extinguish the fire. It pushes smoke and gases into the house.
  • Do not vacuum warm ash with a household vacuum. Use a vacuum made for fireplace ash only after the ash is fully cold.
  • Do not use plastic bins or paper bags for ash. They can melt or ignite.
  • Do not assume “no flames” means the fire is out. Coals can still be hot enough to ignite material.

Make sure it is fully out

Ash can stay hot enough to ignite for several days. Check the ash again the next day before you remove it, and treat the ash as hot until you are certain. Wood ash does not cool within a few hours.

Ash disposal

  • Remove ashes only after the fire has been out for several hours, ideally overnight.
  • Store the ash in a metal can with a tight lid. Leave it sealed for several days, with some sources suggesting about a week, before disposal.
  • Keep the can at least 10 feet from the house, decks, wood piles and other buildings, and set it on concrete or dirt rather than wood or grass.

For a fuller overview of ash and fireplace care, see wood burning fireplace tips.

If the fire gets out of control

If the fire spreads beyond the firebox, or you suspect a chimney fire, get everyone out and call 911. A Class A or ABC fire extinguisher can be used in an emergency, but only if it is safe to do so and your exit is clear. For chimney fire signs and first steps, see chimney fires: early warning signs and what to do.

For wood stoves, close the air controls fully and let the fire burn out inside the closed stove, following the manual.

The complete guide to wood fireplace use and safety

Wood Burning Fireplace Tips: Using and Maintaining Your Fireplace
Read the guide

Keep exploring

Guides from other topics

All topics →