Wood Fireplace Use and Safety

How to Remove Soot From a Fireplace: Brick, Glass and Stone

Cool the fireplace fully, dry-brush loose soot, then clean brick, stone or glass with the gentlest method that works. Here is the safe order of steps.

On this page
  1. Short answer
  2. Before you start
  3. Remove loose soot first
  4. Brick
  5. Stone
  6. Glass doors
  7. When cleaning will not fix it
  8. Safety

Short answer

Let the fireplace cool for at least 24 hours after the last fire, and remove all the ash. Brush off the loose soot dry, then clean with the mildest method that works. Test any cleaner on a hidden spot first. Stop if you see the surface changing color or flaking.

Before you start

  • Make sure the fireplace is fully cold, at least 24 hours after the last fire, with all ash removed.
  • Put down drop cloths to protect the floor and nearby furniture.
  • Wear gloves, eye protection and a dust mask. Ventilate the room well.
  • Keep children and pets out of the area.

Remove loose soot first

Start with a dry soot sponge, the vulcanized rubber type sold for this job. It lifts loose soot without spreading it. Wetting soot first smears it into the surface, so keep the dry step first.

To vacuum up loose soot and ash, use a HEPA or dedicated ash vacuum. Do not use a standard shop vacuum on warm ash, and do not vacuum anything that might still be hot.

Brick

  1. Wet the brick with plain water after the dry step. This helps keep the cleaner and the soot from soaking deep into the pores.
  2. Try the mild options first. Use dish soap and warm water, a baking soda paste (left on for 10 to 15 minutes, then scrubbed and rinsed), or a 1:1 mix of white vinegar and water.
  3. For heavier stains, scrub with a stiff nylon brush and a trisodium phosphate (TSP) solution, mixed exactly as the label says. Rinse thoroughly afterward.
  4. Do not use muriatic acid as a DIY cleaner. It can etch and discolor masonry, and it is dangerous to handle. If stains remain after the milder steps, call a mason or chimney professional.

Do not pressure wash interior brick. It drives soot and water deeper into the masonry. And never mix acid products with bleach or ammonia.

Stone

Stone is porous, and some types are damaged by acids.

  • Use a pH-neutral stone cleaner, or warm water with a little mild dish soap.
  • Never use vinegar, bleach or muriatic acid on limestone, marble or travertine. Acids can break down the stone and the mortar joints.
  • Work in small sections with a damp sponge, not a wet one. Dry the surface as you go.
  • If the fireplace has a thin stone veneer, use light brushing and very little water. Aggressive scrubbing can loosen the veneer or damage the grout lines.

Glass doors

  • Clean the glass only when it is cold.
  • Use a damp paper towel or newspaper dipped in fine wood ash, or a cleaner made for stove glass.
  • Avoid steel wool and abrasive pads. Stove glass is ceramic glass, such as Robax or Neoceram, and it scratches.
  • Household glass cleaners alone rarely remove baked-on deposits.

If the glass turns dark quickly, the usual causes are wet wood, low air settings or a blocked air wash system.

When cleaning will not fix it

Heavy soot on the face of the fireplace usually points to a draft or fuel problem. Soot that returns soon after cleaning can mean a ventilation or liner problem. In either case, cleaning will not solve the cause. Have the chimney inspected. For the warning signs, see what are the signs of a dirty chimney.

If the soot came from a fire elsewhere in the house, do not wipe or scrub the surfaces yourself. Smoke residue is different from fireplace soot, and it can spread. Call a professional restoration company promptly.

Safety

  • TSP and acids irritate the skin and eyes. Ventilate the room and keep children and pets away.
  • Never mix acid cleaners with bleach or ammonia products.
  • Test every cleaner on a small hidden spot first.

For daily fireplace habits that reduce soot, see wood burning fireplace tips.

The complete guide to wood fireplace use and safety

Wood Burning Fireplace Tips: Using and Maintaining Your Fireplace
Read the guide

Keep exploring

Guides from other topics

All topics →