Wood Fireplace Use and Safety

Can a Wood Burning Fireplace Cause Carbon Monoxide Poisoning?

Yes, a wood fireplace can release carbon monoxide, a gas with no smell or color. Learn the causes, symptoms, alarm placement and what to do if one sounds.

On this page
  1. Short answer
  2. How CO gets into the house
  3. Symptoms and who is most at risk
  4. Why you will not smell it
  5. Alarms: where to put them and what to test
  6. If the alarm sounds
  7. Prevention checklist

Short answer

Yes. A wood fire produces carbon monoxide (CO), and the amount rises when the wood smolders or does not get enough air. If the smoke and gases do not leave through the chimney, CO can enter the house. CO is colorless, odorless and tasteless, so only a CO alarm can detect it. The CDC estimates that roughly 400 people in the US die each year from unintentional, non-fire CO poisoning, from all sources.

How CO gets into the house

  • Closing the damper too early. Closing it while embers are still burning can push CO into the room. This is one of the most common fireplace causes.
  • A blocked flue. Nests, debris or a collapsed liner can stop gases from leaving.
  • Downdraft. Wind or the pressure around a short chimney can push gases back down. The 3-2-10 chimney height rule is one way to reduce this risk.
  • Negative house pressure. Exhaust fans, dryers, range hoods and very tight construction can pull air, and flue gases, back into the room.
  • Gas logs. Vented gas logs also need the damper fixed open, as the manufacturer and code require. Gas logs are not CO-free.

Symptoms and who is most at risk

Early symptoms of CO exposure include headache, dizziness, nausea, weakness and confusion. Some people describe it as flu-like without a fever. Higher exposure can cause chest pain, vomiting, loss of consciousness and death.

People at higher risk include sleeping people, infants, older adults, pregnant people and pets. If several people or animals in the same house feel unwell at the same time, consider CO and get fresh air.

Why you will not smell it

Many people assume they would notice smoke or a smell first. That is not reliable. CO can be present without any visible or smelly smoke. Smoke alarms do not detect CO unless the unit is a combination smoke and CO alarm. A fireplace that is “open” is not safe from CO just because you can see the flames.

Alarms: where to put them and what to test

  • Install CO alarms on every level of the home, and outside each sleeping area.
  • Put one near the fireplace room as well.
  • Test them monthly, and replace them at the end of their listed life, which is often 5 to 10 years depending on the manufacturer.

For background on the deposits that block flues, see what are the signs of a dirty chimney.

If the alarm sounds

Get everyone outside to fresh air, call 911, and do not go back inside until emergency responders say it is safe. Do not try to find the source yourself while the alarm is sounding.

Prevention checklist

  • Keep the damper fully open while the fire burns, and close it only after the fire is completely out. See when to close the fireplace damper.
  • Burn dry, seasoned wood, and avoid smoldering fires.
  • Have the chimney inspected every year. An annual inspection catches blockages and liner damage. NFPA 211 calls for this.
  • Use a chimney cap to keep animals and debris out of the flue.
  • Avoid running exhaust fans, such as bathroom, kitchen or dryer fans, while the fireplace is burning, because they can pull flue gases back into the room.
  • Keep CO alarms working on every level.

The complete guide to wood fireplace use and safety

Wood Burning Fireplace Tips: Using and Maintaining Your Fireplace
Read the guide

Keep exploring

Guides from other topics

All topics →