Wood Fireplace Use and Safety

What are the signs of a dirty chimney?

Smoke in the room, hard-to-light fires, tar smells and flakes in the firebox all point to a dirty chimney. Here is how to check and what to do next.

On this page
  1. Short answer
  2. Signs you can notice inside the house
  3. Signs you can see in the flue
  4. Signs outside and on the roof
  5. Signs of damage, not just dirt
  6. When to stop using the fireplace
  7. How often to have the chimney checked

Short answer

A dirty chimney usually shows itself inside the house before it shows on the roof. Watch for smoke coming back into the room, fires that are hard to light or die out, a campfire or tar smell, and black flakes falling into the firebox. Those signs are a reason to check the chimney. The only way to be sure of its condition is a professional inspection, and the standard guidance is to have chimneys inspected at least once a year.

Signs you can notice inside the house

  • Smoke backing up into the room. Smoke should rise up the flue. If it pours into the room, the flue may be blocked by creosote, debris or a nest.
  • Fires that are hard to light or burn poorly. Restricted airflow starves the fire. If the fire keeps dying down, the chimney may need attention.
  • Strong odors. A smoky, campfire or tarry smell often comes from creosote and moisture mixing in the flue. It is often worse on humid days or when the air conditioning is running. A smell is not harmless. It means deposits are present, and deposits can ignite.
  • Black flakes or soot falling down. Flakes or chunks on the hearth or in the firebox point to heavy buildup.
  • A sticky or blackened damper. Creosote can coat the damper and make it hard to open or close.

Signs you can see in the flue

With the fire out and the firebox fully cool, a flashlight pointed up the flue can show what is inside. Look for:

  • black or brown powdery soot
  • dark, shiny, tar-like creosote

You can also scrape the liner with a fireplace tool, wearing gloves and eye protection. A layer about 1/8 inch thick or more means it is time for a sweep, according to CSIA guidance. Never look up a flue while a fire is burning.

Creosote stages

  • Stage 1: dry, flaky soot that brushes off easily.
  • Stage 2: crunchy, tar-like flakes that are harder to brush off.
  • Stage 3: a glazed, shiny, tar-like coating. It is very flammable and needs professional removal.

Any glazed creosote means you should stop using the fireplace and call a professional. For how creosote forms, see creosote in your chimney.

Signs outside and on the roof

  • Black residue or crust on the chimney cap or its screen. Cap screens can clog, and they should be checked during heavy use.
  • Dark, heavy smoke from the top during a fire.
  • Scratching, chirping or nesting material near the flue, which can mean animals are inside.
  • Debris, or creosote flakes, on the roof or on the ground below the chimney.

Signs of damage, not just dirt

Some signs point to structural problems rather than simple buildup:

  • cracked or broken flue tiles, or pieces of tile in the firebox
  • white, powdery staining on outside masonry, which can mean moisture is getting in
  • a rusted damper or cap, or water in the firebox
  • crumbling mortar joints

These need a professional. A sweep alone will not fix them.

When to stop using the fireplace

Stop using the fireplace and get a professional inspection if you see any of these:

  • glazed (stage 3) creosote
  • a blockage, nest or debris in the flue
  • cracked tiles or a damaged liner
  • signs of a chimney fire, even a small one

For the warning signs of a chimney fire and what to do, see chimney fires: early warning signs and what to do.

How often to have the chimney checked

NFPA 211 calls for chimneys, fireplaces and vents to be inspected at least once a year and swept as needed. How often a sweep is needed depends on how much you burn. See how often to sweep a chimney for guidance by use.

Infrequent users still need inspections, because nests and deterioration can happen even when a fireplace is rarely used. Hire a CSIA-certified or NCSG-certified sweep.

The complete guide to wood fireplace use and safety

Wood Burning Fireplace Tips: Using and Maintaining Your Fireplace
Read the guide

Keep exploring

Guides from other topics

All topics →