Gas Fireplaces

Can a Gas Fireplace Cause Carbon Monoxide Poisoning? Signs and Detectors

Yes, a gas fireplace can produce carbon monoxide if combustion or venting fails. Learn the warning signs, vent-free risks and where to place CO alarms.

On this page
  1. How a Gas Fireplace Can Produce CO
  2. Vent-Free Units
  3. Warning Signs
  4. Carbon Monoxide Alarms
  5. If the Alarm Sounds
  6. Preventing CO Problems

Yes. A gas fireplace can produce carbon monoxide (CO) if combustion is incomplete or the venting is blocked or leaking. CO has no smell, color or taste, so you can’t rely on your senses to detect it. A working CO alarm is the only dependable warning, and it should be installed near any gas fireplace.

How a Gas Fireplace Can Produce CO

Carbon monoxide forms when gas doesn’t burn completely. Several things can cause that:

  • A blocked vent or chimney, which keeps exhaust from leaving the home
  • A closed damper on vented logs, which traps exhaust in the room
  • A failed glass gasket on a direct-vent unit, which can let combustion products into the room
  • Misplaced logs or embers, which change how the flame burns
  • The wrong orifice for the gas type, after a conversion
  • Low air supply to the burner

A gas fireplace can also produce CO if the burner is dirty or the gas pressure is wrong. A yellow, sooty flame is a common sign of incomplete combustion.

Vent-Free Units

Vent-free units release all of their combustion products into the room. Risk is higher in small or tightly sealed rooms. Vent-free sets have an oxygen depletion sensor (ODS), which shuts the gas off when oxygen in the room drops to about 18 percent. The ODS senses oxygen, not carbon monoxide, so it doesn’t protect you from CO on its own.

Follow the manufacturer’s stated time limits for vent-free use, and make sure the room has adequate fresh air. Vent-free units are restricted or prohibited in some areas, so check local rules.

Warning Signs

Watch for these signs of a problem:

  • Soot on the logs, glass or nearby walls
  • Yellow or lazy flames on a unit that should burn blue
  • Heavy condensation on the glass or nearby windows
  • Stale air or unusual odors when the unit runs
  • Physical symptoms while the fireplace is on: headache, dizziness, nausea, fatigue or confusion

Symptoms that improve when you leave the home are a warning sign. If several people or pets feel ill at the same time, treat it as a possible CO problem.

Carbon Monoxide Alarms

A CO alarm is designed to sound before CO reaches harmful levels. The UL 2034 standard, which applies to most US home alarms, sets rough thresholds. For example, 70 parts per million (ppm) must sound within 60 to 240 minutes, and 400 ppm must sound within 4 to 15 minutes. Canadian alarms follow CSA 6.19.

Follow these practices:

  • Place alarms on every level of the home and outside sleeping areas.
  • Follow the manufacturer’s distance rules for placement near fuel-burning appliances.
  • Test the alarm monthly.
  • Replace it at the end-of-life date printed on the unit, which is often 5 to 10 years.
  • Use a CO alarm, not just a smoke alarm. Smoke alarms don’t detect CO unless they are combination units.

If the Alarm Sounds

If a CO alarm sounds:

  1. Get everyone outside, including pets.
  2. Call 911 or the fire department from outside the home.
  3. Don’t go back inside until emergency responders say it’s safe.
  4. Get medical attention for anyone with symptoms.

Don’t keep using the fireplace until a qualified technician has found and fixed the cause.

Preventing CO Problems

  • Annual inspection. Have the fireplace and its venting checked and cleaned every year by a qualified technician. Look for NFI or CSIA certification. Our service schedule guide explains what a visit covers.
  • Keep the vent clear. Check the outdoor vent cap for nests, debris and snow.
  • Keep the damper open on vented logs while the burner is running.
  • Don’t run the fireplace with cracked glass, a damaged gasket or a blocked vent.
  • Watch the flame color. Yellow, sooty flames can mean the burner isn’t working properly. For those signs, see gas fireplace flame problems.

Our overview of how gas log fireplaces work explains the vented and vent-free options, which affect this risk. If the flame is small rather than yellow, see why a gas fireplace has a small flame.

The complete guide to gas fireplaces

How Gas Log Fireplaces Work: Logs, Inserts and Power Outages
Read the guide

Keep exploring

Guides from other topics

All topics →