Gas Fireplaces

How Long Do Gas Logs Last and When to Replace Them

How long gas logs last, what shortens their life, and the signs they need replacing. Ceramic fiber and refractory cement logs compared, with typical costs.

On this page
  1. What Affects How Long Gas Logs Last
  2. Typical Lifespans by Material
  3. Signs the Logs Need Replacing
  4. When the Burner or the Whole Set Needs Replacing
  5. Replacement Costs
  6. Making the Logs Last

Gas logs typically last anywhere from about 5 years to 20 years, depending on the material, how often the fireplace runs, and how well it is maintained. Ceramic fiber logs usually last less than refractory cement logs. The burner and valve often last longer than the logs. These are typical ranges, not guarantees.

What Affects How Long Gas Logs Last

Several factors change how long a set holds up:

  • Material. Ceramic fiber is lighter and more fragile. Refractory cement is heavier and tends to hold up better to thermal stress.
  • Usage. Heavy daily use through a cold season wears logs and burners faster than occasional use.
  • Placement and maintenance. Logs that sit in the flame path, or that have been moved, get more heat and soot. Keeping them clean and correctly placed helps them last.
  • Burner condition. A set that is correctly matched to its burner, and a burner that is in good shape, protect the logs.

Typical Lifespans by Material

These are rough figures. Individual sets vary:

  • Ceramic fiber logs: roughly 5 to 10 years, or longer with light use
  • Refractory cement logs: roughly 10 to 20 years
  • Burner, valve and pilot assembly: often 10 to 20 years

Ventless (vent-free) logs are sold as a system with their burner, and some sources put their lifespan at a few years. Check the manufacturer’s guidance for your model, since heat and soot can shorten a log set’s life.

Figures from online sources differ. Treat them as a guide and check the manufacturer’s information for your set.

Signs the Logs Need Replacing

Inspect the logs and consider replacing them if you see any of the following:

  • Cracks, chips, flaking, crumbling or missing pieces
  • Heavy soot or black staining that stays after the logs are properly placed
  • Fading or discoloration of the finish
  • An unusual odor or flames that flicker, pop or look uneven

Cracked logs are not just cosmetic. They can shift, which changes where the flame hits and can cause more soot.

When the Burner or the Whole Set Needs Replacing

Replace the burner or the whole set, rather than just the logs, if you see:

  • A rusted or corroded burner pan
  • Soot that keeps coming back even after the logs are placed correctly
  • Repeated pilot or oxygen depletion sensor (ODS) failures on a vent-free set

Logs must be the manufacturer’s listed logs for your burner. Mixing brands or parts can void the listing, so don’t assume any set will fit any burner.

Replacement Costs

Rough US figures:

  • A vented set with burner: about $300 to $1,500
  • A vent-free set: about $400 to $1,500
  • Installation: about $150 to $500

Costs vary by region and by model. Ember material wears out faster than the logs, often every season or two. Replacing it is a cheaper fix than a full set.

Making the Logs Last

  • Have a professional check the logs, burner and pilot during an annual service. Service catches cracking and failing parts early.
  • Clean the logs with a soft, dry brush, outdoors if you can. Don’t use water or cleaners, which can damage ceramic fiber.
  • Handle logs gently. Dropping them or over-tightening them can crack them.
  • Don’t add wood, pinecones or other materials to a gas log set.
  • Wear a dust mask and gloves when handling ceramic fiber logs, since the fibers can irritate the skin and lungs.

If you’re unsure which kind of log set you have, our overview of how gas log fireplaces work explains vented and vent-free logs. Sooty logs can also come from placement or flame problems, so check gas fireplace flame problems before you buy new logs.

The complete guide to gas fireplaces

How Gas Log Fireplaces Work: Logs, Inserts and Power Outages
Read the guide

Keep exploring

Guides from other topics

All topics →