Wood Stoves

What material can go behind a wood stove?

Brick, natural stone, ceramic tile, concrete and sheet metal are noncombustible and can sit behind a wood stove. Drywall and paneling are combustible.

On this page
  1. The noncombustible list
  2. Materials that are combustible
  3. Materials alone don’t reduce clearance
  4. Shields that do reduce clearance
  5. Brick, stone and thin veneer
  6. Corners and listings
  7. When in doubt, get it inspected
  8. Common misconceptions

Noncombustible materials can go behind a wood stove. They include brick, natural stone, ceramic or porcelain tile, concrete, sheet metal (steel or copper) and cement board used as a backer. Combustible materials such as drywall, wood paneling and vinyl need the full listed clearance. Even noncombustible material reduces the clearance only when it is spaced off the wall with a ventilated air gap.

The noncombustible list

  • Brick
  • Natural stone
  • Ceramic or porcelain tile
  • Concrete
  • Sheet metal, including steel and copper
  • Cement board (such as Durock, HardieBacker or Wonderboard), as a backer for tile

Cement board is a noncombustible backer for tile. It is not a heat shield on its own, so use it as part of a spaced shield, as described below.

Materials that are combustible

  • Gypsum drywall, including paper-faced board. Fire-rated Type X drywall is still treated as combustible.
  • Wood paneling and shiplap.
  • Vinyl and plastic laminates, including vinyl tile.
  • Faux-stone polyurethane panels.
  • Wallpaper.
  • Glass and mirrors. They are not suitable wall shields.

Materials alone don’t reduce clearance

Tile, brick or stone fixed directly to a combustible wall does not reduce the required clearance. Heat conducts through the material into the wall behind it. Thicker stone doesn’t mean zero clearance, because without an air gap heat still reaches the wall. Heat-resistant paint doesn’t help either.

Shields that do reduce clearance

A reducing shield is a noncombustible panel mounted about 1 inch off the wall on noncombustible spacers. Its top and bottom edges stay open so air can flow behind it. For 24-gauge sheet metal on a ventilated 1-inch gap, NFPA 211 allows up to a 66% clearance reduction.

Keep the spacers out from directly behind the stove and connector pipe. Use thinset mortar, noncombustible grout and metal or masonry fixings. Avoid organic mastics near high heat. Prefabricated UL 1618-listed stove boards are another option, and they should be installed with their listed spacer kits.

For the spacing and clearance figures that go with a shield, see our guide to the wall behind a wood stove.

Brick, stone and thin veneer

Natural stone and real brick handle heat well. Very thin veneer can crack if the stove sits too close, so check the clearance and the veneer’s rating. Stone or brick reduces clearance only when it is part of a ventilated shield.

Corners and listings

Corner installs use separate clearance figures from the manual. Check the listing for the corner distances before you plan the materials. The stove’s listing and your local code override the general rules in this article.

When in doubt, get it inspected

If the wall gets too hot to keep your hand on, the clearance is not enough. Have the installation inspected before you finish the wall, and keep the paperwork. Insurers may ask for it. See our guide to whether house insurance goes up with a wood stove.

Common misconceptions

  • “Any tile on drywall is fireproof.” The drywall behind it still overheats.
  • “High-temperature paint makes a wall safe.” It does nothing for clearance.
  • “Fire-rated drywall is noncombustible.” Type X is still treated as combustible.
  • “Thicker stone means zero clearance.” Without an air gap, heat still conducts through.

The complete guide to wood stoves

Wood Burning Stove vs Fireplace: Heat, Cost and Efficiency Compared
Read the guide

Keep exploring

Guides from other topics

All topics →