Puffing is rhythmic bursts of smoke from the air inlet, the door seams or the stove body while the door is closed. It usually means the fire is starved of air. Wood gases build up, ignite in a small burst, push smoke out and then the cycle repeats. Open the air control, let the load char before you turn it down, and load smaller amounts. If the puffing keeps happening, check the chimney.
What puffing looks like
Puffing is different from a steady smoke leak. It comes in puffs, from seams, the air inlet or the door, while the door stays shut. It is most common after a big load of dry wood, when the air has been turned down too soon.
Why it happens
When the fire doesn’t get enough air, the wood releases gases instead of burning them cleanly. Those gases build up in the firebox and ignite in a small burst, which pushes smoke out through any gap. The fix is to give the fire enough air to burn those gases. Puffing usually means the air was turned down before the wood had settled into a steady burn.
How to stop it now
- Open the air control to let the fire burn more freely.
- Let the load char for about 15 to 30 minutes before you turn the air down, and do it in stages.
- Load smaller amounts at a time, or use larger splits, so the wood doesn’t gas off all at once.
- Don’t turn the air down to stop the puffing. That usually makes it worse.
Wind and the chimney top
Wind can cause puffing. Gusts create downdrafts at the top of the chimney that push air and smoke back toward the stove. A wind-directional or anti-downdraft cap can reduce this. Raising the chimney can also help, but check the height rules first, since a chimney that is too short will not draw well. The 3-2-10 rule sets the minimum height.
Restrictions in the chimney and stove
A restricted chimney cuts draft and causes puffing. Common causes include creosote buildup, a plugged cap screen and a bird’s nest. A blocked or collapsed baffle or air tube can also disrupt the flow of gases through the stove.
If the puffing keeps happening, have the chimney swept and inspected. Persistent puffing means the chimney needs inspection and sweeping. For related fixes, see why your wood stove keeps going out.
Gaskets and the dollar-bill test
Worn door or glass gaskets let smoke escape as puffs. To check the seal, close the door on a dollar bill. If you can pull the bill out easily, the gasket is not sealing well, so replace it. Hard puffing can also unseat the door or gaskets, so stop loading and open the air until the fire settles.
Catalytic stoves
On a catalytic stove, puffing can come from engaging the bypass too early. Engage the bypass only once the catalyst is lit, which is about 500°F on the probe thermometer. Closing it too early can cause stalling and puffing. Follow the manual’s light-off steps. For how the two designs differ, see catalytic vs non-catalytic wood stoves.
Why puffing is not harmless
Each puff pushes smoke and carbon monoxide into the room. Install carbon monoxide alarms on every level and near sleeping areas. If the puffing won’t stop after these checks, stop using the stove until a professional has looked at it. If you smell smoke, open a window and let the stove cool.
Common misconceptions
- “Puffing means the wood is too wet.” Overly dry wood with low air is a more common cause.
- “Turn the air down to stop it.” That usually makes it worse.
- “It’s harmless.” Each puff pushes smoke and carbon monoxide into the room.
For the related problem of smoke when you open the door, see why smoke comes out of a wood stove when you open the door.