It can, but not always, and the effect depends on your insurer and your state or province. Some insurers leave premiums alone. Some add a surcharge, and some decline coverage. Insurers commonly ask whether the stove is your main heat source, whether it is listed and professionally installed, and whether the chimney has been inspected and swept. Tell your insurer before you install a stove. Failing to disclose one can give the insurer grounds to deny a fire claim or cancel the policy.
Why insurers look at wood stoves
Insurers look at wood stoves because of fire risk. Creosote buildup in the chimney is a common cause of chimney fires, and heating equipment is a common source of home fires. Insurers also consider how the stove was installed, whether it is listed, and how much you rely on it for heat.
What affects your rate and coverage
- Primary or supplemental heat. Using a stove as your main heat source usually draws more scrutiny than occasional use.
- Listing. Insurers typically look for a UL-listed stove (UL 1482), or ULC S627 in Canada, installed to the manual and NFPA 211.
- Installation and permits. Many insurers want a building permit and a code inspection, or a professional installer certified by NFI or CSIA.
- Chimney type and condition. Insurers may check clearances, floor protection, whether the chimney is a listed Class A system or a lined masonry chimney, and its overall condition.
- Maintenance records. Some insurers ask for proof of an annual chimney inspection or cleaning, which NFPA 211 recommends.
- Carrier and location. Rules and pricing vary by insurer and region, so there is no single answer.
Insurers may also ask about safety equipment. Smoke and carbon monoxide alarms are common requirements, and a fire extinguisher near the stove is a sensible addition.
What insurers usually ask for
Expect to provide some of the following:
- A stove that is listed to UL 1482 or ULC S627
- Installation to the manufacturer’s manual and NFPA 211, with clearances that match the label
- A building permit and a code inspection, or a professional install
- An inspection report and proof of annual sweeping
- Smoke and carbon monoxide alarms
For what the installation itself should look like, see our guide to the wall behind a wood stove.
Unlisted and homemade stoves
Homemade, uncertified or unlisted stoves, including barrel stoves, are often refused by insurers. If the stove is unlisted, a home can become difficult or impossible to insure, even if the install is careful.
Outdoor wood boilers and wood furnaces may be underwritten differently from indoor stoves. If you are considering one, see our guide to wood burning furnaces for homes.
Canada and WETT
In Canada, insurers routinely require a WETT inspection, which is a Wood Energy Technology Transfer inspection of the installation. Ask your insurer or broker which inspection they accept before you install the stove.
What to ask your insurer
- Does my policy cover a wood stove, and will it change my premium?
- Do you need the stove to be listed, inspected or installed by a certified professional?
- Do you need a permit or a WETT inspection?
- What maintenance records do you want me to keep?
- Does my coverage change if the stove becomes my main heat source?
Get the answers in writing, since the policy wording is what counts.
What to keep on file
Keep receipts, permits, inspection reports and sweep records. If you ever make a claim, these records show that the stove was installed and maintained to the standards your insurer expects.
Common misconceptions
- “Premiums always jump a lot.” Many policies change little or not at all.
- “You only need to tell them if you file a claim.” Non-disclosure can void coverage.
- “Any stove is fine if it’s installed carefully.” Unlisted stoves can make a home uninsurable.
For the basic stove choice, see wood burning stove vs fireplace.