Building a Fireplace

Fireplaces in Manufactured Homes: Rules and Installation

Fireplaces in manufactured homes must be listed or approved for them. Learn the HUD rules, approved options, outside air needs and installation basics.

On this page
  1. The rule that governs it
  2. Approved options
  3. Outside air and venting
  4. Installation basics
  5. Common mistakes
  6. Before you buy
  7. Common questions

Yes, a manufactured home can have a fireplace or stove. It has to be a unit listed or approved for manufactured homes, installed to that listing and the manufacturer’s instructions. A site-built masonry fireplace is not practical in these homes. An EPA-certified stove is not automatically approved for one.

The rule that governs it

Manufactured homes built since June 15, 1976 are built under the federal HUD Code, which sets standards in 24 CFR Part 3280. That code includes rules for fuel-burning appliances. Local and park rules can add requirements on top of it.

Homes built before that date were not built to the HUD Code. Insurers may refuse solid-fuel heat in older homes, so check with your insurer before you buy anything.

Approved options

  • Electric. Electric units need no venting. Plug-in, wall-mounted, and built-in units are all available. They are generally the simplest option, but check the unit’s listing and its electrical requirements.
  • Gas. The unit must be a direct-vent type approved for manufactured homes. It draws combustion air from outside and vents through a wall. Vent-free gas logs are often not approved for manufactured homes, and some states restrict them.
  • Solid fuel (wood or pellet). The unit must be listed for manufactured homes. It needs its listed factory-built chimney system, a direct outside air supply, and the clearances from its listing. Solid-fuel units are generally not allowed in sleeping rooms. Check the listing and local rules.

Some homes leave the factory with a fireplace already installed, usually electric or direct-vent gas. If you are buying a new home, ask whether the factory unit is one of the approved models.

Outside air and venting

A solid-fuel unit in a manufactured home needs its combustion air ducted directly from outside to the unit. Air from inside the home is not a substitute, and cracking a door does not provide enough air. Use the outside air kit the manufacturer specifies.

The chimney must be the listed factory-built chimney system that the appliance maker specifies, with a spark arrestor and cap. Do not mix chimney brands. Doing so can void the listing.

The chimney top must sit 3 ft above the roof penetration and 2 ft above anything within 10 ft horizontally. The 2 + 10 rule article explains how to measure it. Penetrations through the ceiling and roof need the listed firestop and roof flashing, and the home’s vapor barrier must stay sealed.

Installation basics

Requirements vary by model, so start with the listing label and the manual. In general:

  • Secure the unit to the floor structure. Manufactured-home floors and chassis are not designed for the multi-ton loads of a masonry fireplace. That is why site-built masonry is not practical here.
  • Bond the unit electrically to the steel chassis. The manual will specify the wire, which is often 8 AWG copper.
  • Use the floor protection and clearances on the listing label. They vary by model.
  • Get a permit where one is required, and have the finished installation inspected.
  • Hire a licensed installer who has worked on manufactured homes before.

Common mistakes

  • “Any EPA-certified stove is fine.” EPA certification covers emissions. Approval for manufactured homes is a separate listing, and a stove needs both.
  • “Room air is enough if a door is cracked.” A solid-fuel unit needs a direct outside air supply.
  • “Vent-free gas logs are an easy fix.” Many are not approved for manufactured homes, and some states restrict them.
  • “Mixing chimney brands saves money.” It voids the listing, and the unit may no longer be safe to use.

Before you buy

  • Talk to your insurer first. Many insurers require a professional installation and an inspection for solid-fuel heat.
  • Check park rules. Many parks have their own restrictions on heating appliances.
  • Contact the local building department. Many places require a permit for this work.
  • Install carbon monoxide and smoke alarms. Manufactured homes are small and tight, so combustion gases can build up quickly.

Common questions

Can you put a fireplace in a manufactured home?

Yes, if the unit is listed or approved for manufactured homes and it is installed to its listing. That means outside air for solid-fuel units, a listed chimney where needed, and secure mounting. A site-built masonry fireplace is not practical in these homes.

Do they make mobile homes with fireplaces?

Some do. Certain homes come from the factory with an electric or direct-vent gas fireplace already installed. Whether a particular model has one depends on the manufacturer and the options chosen.

How to install a fireplace in a manufactured home?

Start by choosing a unit that is listed for manufactured homes. Follow the manual and the listing, and hire a licensed installer who has done manufactured-home work. Get any required permit, and have the finished installation inspected. For the chimney height rule, see what is the 2 + 10 rule for fireplaces?

The complete guide to building a fireplace

Wood Burning Fireplace Construction: How Fireplaces Are Built
Read the guide

Keep exploring

Guides from other topics

All topics →