Fireplace Makeovers

Fireplace Lighting Ideas: Sconces, Recessed Lights and Hearth Lights

Fireplace lighting ideas for sconces, recessed lights and LED accents, plus heat, wiring and color temperature tips for safe, good-looking results.

On this page
  1. Sconces on either side of the fireplace
  2. Recessed and wall-washing lights
  3. Picture lights over the mantel
  4. Under-mantel and hearth LED strips
  5. Hearth and built-in niche lights
  6. Why lights don’t go inside a wood-burning firebox
  7. Color temperature and dimmers
  8. Wiring, permits and where wire can’t go

Good fireplace lighting does two jobs. It lights the room, and it makes the fireplace look intentional when it isn’t burning. The right fixture depends on what you want to show off, such as stone, brick or art, and on how close the light sits to heat.

Sconces on either side of the fireplace

Sconces are a simple way to add light without touching the firebox. Line them up with the mantel ends, the edges of a piece of art or the sides of a built-in, and keep the pair symmetrical. A common mounting height is about 60 to 72 inches from the floor, though the right height depends on the fixture and your ceiling.

Keep fixtures and fabric shades out of the zone above the opening, where heat rises. Plug-in or rechargeable sconces avoid cutting into masonry. Hardwired sconces on brick usually need surface conduit or chased wiring, which is typically work for an electrician under a permit.

Recessed and wall-washing lights

Recessed lights can wash a wall with light, which suits textured brick and stone. As a rough guide, place wall-washing fixtures about 2 to 3 feet from the wall and space them about that far apart. To graze the surface and bring out texture, mount them closer, around 6 to 12 inches from the wall.

Use IC-rated, airtight fixtures in insulated ceilings. Don’t assume a standard recessed can is fine near a chimney chase. Find out where the chase and flue run before you cut an opening.

Picture lights over the mantel

If you hang art above the mantel, a picture light can highlight it. Choose LED fixtures, since they give off little heat. Keep the fixture clear of the heat rising from the opening and of any combustible frame. For sizing and placement of the art itself, see what to put above a fireplace.

Under-mantel and hearth LED strips

LED strips tucked under a floating mantel or along a hearth ledge give a soft glow. Look for strips on an aluminum channel with a diffuser, which helps hide the light source.

Many guides call LEDs safe near a fireplace because they run cool. Cooler is not the same as heat-proof. Heat shortens LED life, so check the rated operating temperature and keep strips away from the firebox, the opening and any other direct heat.

Hearth and built-in niche lights

Low-voltage LED pucks or linear lights rated for the location work well in built-in niches and on shelves beside the fireplace. Keep the cords out of the spot where embers could land on the hearth.

Why lights don’t go inside a wood-burning firebox

Some decor guides suggest fairy lights or LED candles in an unlit firebox. For a wood-burning fireplace, keep lights out of the firebox. It’s built for fire and gets very hot when in use, and most lights and their cords aren’t rated for that. Gas units sometimes come with factory accent lighting. Use only the manufacturer’s accent kit in that case.

Color temperature and dimmers

Warm white around 2700 to 3000K sits well beside firelight. Cool white at 4000K or higher can make stone or brick look harsh. Where you can, pick fixtures with a high color rendering index (CRI), around 90 or above, so the stone and brick look true to life.

Put sconces, recessed lights and accents on separate dimmer zones. That way you can light the room for everyday use and bring the fireplace wall forward for the evening.

Wiring, permits and where wire can’t go

Never run wiring inside or against a chimney flue. Turn off the circuit at the breaker before any wiring work, and check the local permit rules before you start. If you aren’t sure how a fixture will be wired, ask a licensed electrician.

For more ideas across the whole fireplace, see fireplace makeover ideas.

The complete guide to fireplace makeovers

Fireplace Makeover Ideas: Modern Designs on Any Budget
Read the guide

Keep exploring

Guides from other topics

All topics →