Quick answer
Fireplace inserts come in four main types: wood, gas (usually direct-vent), pellet and electric. Each one has different install needs, running costs and heat output. Most wood and gas inserts need a sized liner in the chimney. True see-through inserts for a masonry opening are rare, so if you want a view through the fire, check the model’s listing first.
Types of fireplace inserts
- Wood. Burns logs. It’s usually the choice for heat without power, and it needs a chimney liner and regular sweeping.
- Gas (direct-vent). Burns gas, with the look of a fire at the push of a button. It typically uses a co-linear kit or two 3-inch liners. Only some gas inserts, such as those with a standing pilot or a battery backup, keep working in a power outage.
- Pellet. Burns wood pellets from a hopper. It needs electricity to run the auger and fan, and it uses a 3- to 4-inch liner.
- Electric. Plugs in or is hardwired, and it creates a flame effect. It supplies some heat, but it isn’t a whole-house heating source.
For the basics of how a wood insert compares with a zero-clearance fireplace, see fireplace insert vs zero clearance fireplace.
Wood inserts: combustion types
Wood inserts use one of three combustion approaches:
- Non-catalytic. Uses secondary air tubes and a baffle to burn off smoke. These are simpler to run.
- Catalytic. Uses a catalyst to burn off smoke at a lower temperature. It gives long, low burns. The catalyst usually lasts several seasons, often cited at about 10,000 to 12,000 hours, although this varies. A clogged or worn catalyst cuts the heat.
- Hybrid. Combines a catalyst with secondary air.
Catalytic isn’t always better. It’s better for long, low burns, while non-catalytic is simpler to operate.
Flush and projecting models
Flush inserts sit inside the opening and rely on a blower to move heat into the room. Blowers are typically around 100 to 200 CFM or more. Most wood inserts still provide heat without power, but the blower only works with electricity.
Projecting models extend past the opening, usually onto the hearth. They add some radiant heat, which can help in a room where the blower isn’t enough.
See-through inserts
If you want to see the fire from two sides, be aware of what’s realistic:
- Wood, in a masonry opening. Two-sided wood inserts for masonry openings are rare to nonexistent. Most see-through wood options are factory-built zero-clearance fireplaces.
- Gas, in a masonry opening. Usually a gas insert or a decorative conversion is the realistic route. Check the listing for the model.
- Any see-through unit. Check that the model is listed for your fireplace type, and confirm the clearances and the liner before you buy.
Product lines change, so verify the current models before you commit.
Brands, and who owns them
These brands come up often for each fuel type. Lineups change, so verify current models and specifications before you buy.
- Gas inserts: Majestic, Heat & Glo, Napoleon, Monessen and Empire.
- Wood inserts: Regency, Lopi, Quadra-Fire, Jøtul, Hearthstone, Blaze King, Pacific Energy, Osburn, Drolet, Napoleon, Kozy Heat, Englander, Buck Stove and Vermont Castings.
- Electric inserts: Dimplex, Modern Ember, ClassicFlame and SimpliFire.
Some brands share a parent company, which can help you compare dealers and parts. Travis Industries owns Lopi, Avalon and FireplaceX. Hearth & Home Technologies owns Quadra-Fire, Harman, Heat & Glo and Heatilator. SBI owns Osburn, Drolet and Enerzone.
For a closer look at how to judge brands, see who makes the best wood-burning fireplace.
How much an insert costs
Installed costs vary by region, chimney and fuel. Typical ranges:
- Wood: about $3,500 to $7,000
- Gas: about $3,000 to $6,000
- Pellet: about $3,000 to $5,500
- Electric: the unit can be $300 to $2,500 or more, plus about $150 to $800 or more for an electrician
A wood insert install often includes a stainless steel liner, which can add $1,000 to $3,000 or more. Ask whether a quote includes it. For the liner details, see do you need a chimney liner for a fireplace insert.
Tax credits
The US federal 25C tax credit ended for installations after December 31, 2025. Check whether your state or local government offers a rebate. Those programs vary and change over time.
What size do you need?
There isn’t a reliable single number for a given floor area, such as 1,000 square feet. The heat a unit delivers depends on the floor plan, insulation, climate and where the unit sits. Manufacturers’ square-footage claims tend to be optimistic. An insert usually heats its own room and the rooms that open onto it. It isn’t a whole-house system.
Start by measuring the opening and checking the model’s listing. Then compare its heat output with the room you want to heat. How to measure your fireplace for an insert covers the measurements.
What the install needs
- Liner. Most wood inserts use a 6-inch stainless steel liner, and some large units use 8 inches. The liner must run the full length of the chimney in most cases.
- Emissions. New US wood inserts must meet the EPA 2020 limit of 2.0 grams per hour on the crib wood test, or 2.5 grams per hour on the cord wood test.
- Power. Blowers, electric inserts and pellet inserts need power. Check the outlet and circuit before you buy.
- Installer. Choose an NFI-certified installer, and get a permit where required. See do you need a permit to install a fireplace insert or wood stove.
Choosing an insert: checklist
- Decide the fuel: wood, gas, pellet or electric.
- Confirm the model is listed for your fireplace. A factory-built fireplace needs an insert listed for it.
- Measure the opening, including the depth at the top and the rear width.
- Check the liner size and whether your chimney needs a new liner.
- Compare heat output with the room, not the maximum square-footage claim.
- Check the EPA certification for wood inserts.
- Confirm the warranty and parts availability.
- Find an installer before you buy.
Safety
- Keep the door gasket and glass intact, and replace a cracked glass panel before you use the unit.
- Sweep the chimney at least once a year, and check the liner.
- Install carbon monoxide and smoke alarms.