Quick answer
Moderately hard. How hard it is depends mainly on two things: whether you can get a gas line to the spot, and whether you can run the vent. An insert into an existing masonry fireplace is the easiest route. A direct-vent unit through an exterior wall is the next step up. A new fireplace in the middle of a room, which needs a vent through the roof and new framing, is the hardest. Gas work is licensed work in most areas, so plan to hire a professional.
How hard it is, by install type
Gas insert in an existing fireplace (easiest). If you have a masonry fireplace, a gas insert slides into the firebox. Flexible intake and exhaust liners run down the existing chimney. This is often a one-day install, once the planning and parts are in place.
Direct-vent unit on an exterior wall (moderate). If you don’t have a chimney, a direct-vent fireplace can sit against an exterior wall and vent straight through the wall. No chimney is needed, but the wall, the gas line and the vent must all line up.
New fireplace in an interior location (hardest). Building a fireplace where none exists means opening drywall, building a framed chase or an exterior enclosure, running new gas and electrical lines, and routing the vent. A vertical vent through the roof is the most involved version. This is a remodel, not a simple install.
What the install involves
Most gas fireplaces need three things in place:
- A gas connection. A licensed fitter taps the existing natural gas or propane supply, adds a shut-off valve, and runs a pressure test for leaks.
- Electrical power. Many gas fireplaces need power for a blower, a fan or electronic ignition. Some need only a low-voltage wall switch. Others need an outlet nearby.
- A vent system. Direct-vent systems must keep specified clearances from combustible materials such as wood framing and drywall. The manual sets these clearances.
Keep the vent terminations clear of windows, doors, soffits and grade. The manual and the local fuel gas code set the distances. Often, the minimum from openable windows and doors is about 9 to 12 inches, but the exact figure varies by model and code.
Vent options
- Direct-vent. These draw combustion air from outside and are sealed from the room. A coaxial vent pipe is common. This is the usual choice when you add a gas fireplace to an existing home.
- Vent-free. These need no vent, but they release their combustion products into the room. They add moisture to the room and may be restricted or banned in some areas. Check local rules before you choose one.
Don’t assume that a gas fireplace needs a chimney. A direct-vent unit can vent straight through a wall.
Gas line access and capacity
The gas line is often the biggest variable. A licensed fitter needs to run pipe, such as black iron or corrugated stainless steel tubing (CSST), from the supply. The gas meter or propane tank must also have enough capacity for the new appliance.
Gas line work commonly costs about $15 to $25 per foot, or roughly $250 to $1,000 or more in total, depending on the distance and the route.
What it costs
These are typical ranges, and they vary by region and by the work involved:
- Gas insert in an existing fireplace: about $3,000 to $6,000 installed.
- Built-in direct-vent unit, with framing and finish: about $4,000 to $10,000 or more.
Propane and natural gas units are fuel-specific. Switching from one to the other usually needs a conversion kit from the manufacturer, so confirm which fuel your home has before you order.
Timing and who does the work
A standard insert install often takes a day, once the planning and parts are ready. More involved projects, such as a new interior build, can take a couple of weeks, because the framing, the drywall and the finish are part of the schedule.
Running gas lines and making gas and vent connections is licensed work in most areas. Some homeowners handle framing or finishing, but the gas connection should be done by a licensed professional.
Permits
Gas permits, and often mechanical or building permits, are usually required, with inspections. The inspector checks the gas connection, the vent and the clearances. Your installer may pull the permit for you, so confirm who is responsible.
If you’re switching a wood fireplace to gas, converting between gas and wood explains the chimney and capping steps. For a gas fireplace you want to remove, see how to get rid of a gas fireplace.
Safety
- Have a leak test done on all new gas piping.
- Install carbon monoxide alarms near the appliance and in the home.
- Glass fronts get hot, so use a barrier screen where children are present.